Technical data:
LIGHT SOURCE:
LED: 3.5W SMD LED + 3W POWER LED
Number of lumens: 330lm main light, 80lm flashlight
Color: 6000K
ENERGY SOURCE:
Battery: LI-ION 3.7V 2600mAh
Working time: 4h
Charging time: 4h
Charging: 230V AC charger + USB cable
CONSTRUCTION AND FEATURES:
Material: ABS + Rubber
Shade: Polycarbonate (PC)
Rotating body
2 hooks
2 magnets on the back of the lamp and a magnet in the base
Protection class IP54
Mechanical protection class IK07
Dimensions: 25 x 5,5 x 4cm
YATO cordless workshop lamp with 330lm main light and 80lm flashlight. The model equipped with a capacious, lithium-ion battery with a capacity of 2600mAh will provide a minimum of 4 hours of continuous operation. Made of durable materials, m.in ABS and polycarbonate, which provide mechanical protection class IK07 and IP54 tightness class. Rotating body, 2 hooks and 3 magnets allow you to properly set the light flux
ABS – is characterized by very high hardness, which makes it highly resistant to scratches, impacts and dents. In addition, it is resistant to various chemical agents.
IP54 -protection against access to dangerous parts by wire and protection against dust and protection against water splashes from any direction
IK07- IK is a mechanical resistance classification defined in EN 62262 and IEC 62262:2002. The higher the numerical value on a scale of 0-10 , the higher the level of endurance. IK07 stands for impact resistance with an energy of 2J (in practice, a hammer impact weighing 0.5kg from a height of 40cm
POLYCARBONATE (PC) – is characterized by very high resistance and rigidity. Resistant to high-energy radiation, as well as UV and atmospheric factors. All this with very good light penetration
**
LIGHT SOURCE:
LED: 3.5W SMD LED + 3W POWER LED
Number of lumens: 330lm main light, 80lm flashlight
Color: 6000K
ENERGY SOURCE:
Battery: LI-ION 3.7V 2600mAh
Working time: 4h
Charging time: 4h
Charging: 230V AC charger + USB cable
CONSTRUCTION AND FEATURES:
Material: ABS + Rubber
Shade: Polycarbonate (PC)
Rotating body
2 hooks
2 magnets on the back of the lamp and a magnet in the base
Protection class IP54
Mechanical protection class IK07
Dimensions: 25 x 5,5 x 4cm
YATO cordless workshop lamp with 330lm main light and 80lm flashlight. The model equipped with a capacious, lithium-ion battery with a capacity of 2600mAh will provide a minimum of 4 hours of continuous operation. Made of durable materials, m.in ABS and polycarbonate, which provide mechanical protection class IK07 and IP54 tightness class. Rotating body, 2 hooks and 3 magnets allow you to properly set the light flux
ABS – is characterized by very high hardness, which makes it highly resistant to scratches, impacts and dents. In addition, it is resistant to various chemical agents.
IP54 -protection against access to dangerous parts by wire and protection against dust and protection against water splashes from any direction
IK07- IK is a mechanical resistance classification defined in EN 62262 and IEC 62262:2002. The higher the numerical value on a scale of 0-10 , the higher the level of endurance. IK07 stands for impact resistance with an energy of 2J (in practice, a hammer impact weighing 0.5kg from a height of 40cm
POLYCARBONATE (PC) – is characterized by very high resistance and rigidity. Resistant to high-energy radiation, as well as UV and atmospheric factors. All this with very good light penetration
**