Cold galvanizing, Flake technology – better corrosion protection,
longer corrosion durability due to the combination of active and passive protection, high efficiency with less thickness
compared with zinc powder, optimal adhesion, resistant to weather conditions, forms a coating that displaces water,
excellent abrasion resistance, allows spot welding, water and salt resistant, high zinc content.
Area of application
• High performance
• Universal use
• Optimal dosage
• Saves re-electroplating costs
Examples of applications
• Priming before painting
• Galvanizing of non-removable parts
• Re-galvanizing of oxidized elements
• Repair of damage caused by welding, drilling or cutting
• Protection against aggressive preparations
• Conductive coating for welding work
How to use
Previously dried surfaces thoroughly clean, degrease, or remove rust.
Shake the container well so that you can hear the balls inside.
Zinc-Spray spray from a distance of approx. 25 cm.
After 1 to 2 minutes, spray the surface transversely a second time.
Before use, check the durability of the coating at important points.
When the work is completed, place the container with the valve down and press it so as to clean it.
Surfaces covered with the preparation can be easily varnished and welded.
longer corrosion durability due to the combination of active and passive protection, high efficiency with less thickness
compared with zinc powder, optimal adhesion, resistant to weather conditions, forms a coating that displaces water,
excellent abrasion resistance, allows spot welding, water and salt resistant, high zinc content.
Area of application
• High performance
• Universal use
• Optimal dosage
• Saves re-electroplating costs
Examples of applications
• Priming before painting
• Galvanizing of non-removable parts
• Re-galvanizing of oxidized elements
• Repair of damage caused by welding, drilling or cutting
• Protection against aggressive preparations
• Conductive coating for welding work
How to use
Previously dried surfaces thoroughly clean, degrease, or remove rust.
Shake the container well so that you can hear the balls inside.
Zinc-Spray spray from a distance of approx. 25 cm.
After 1 to 2 minutes, spray the surface transversely a second time.
Before use, check the durability of the coating at important points.
When the work is completed, place the container with the valve down and press it so as to clean it.
Surfaces covered with the preparation can be easily varnished and welded.