OWS-200™ microbiological-enzymatic preparation removing hydrocarbons in oil-water separates
PRODUCT DESCRIPTION
OWS-200TM has the ability to significantly reduce hydrocarbon impurities in water and oil separation installations, thus reducing the cost associated with their disposal; contains a mixture of naturally occurring micro-organisms selected for their ability to decompose hydrocarbons to carbon dioxide and water; uses the bioremediation process . The addition of natural cleaning and degreasing BIOSURFACTANT helps to maintain hygiene and safety of the workplace. OWS-200TM meets environmental and sanitary standards, is completely safe for human health and provides comfort of work; effective and economical, biodegradable. Regular use eliminates
sediments, positively affects the operation of equipment and promotes a trouble-free production process. Perfect for routine maintenance.
HOW TO USE?
OWS-200TM should be used without dilution. The amount of preparation applied depends on the size of the installation and the type of impurities.
Procedure for the first application of the preparation for installations with a size of 1m3:
1. Before the first use, the installation must be cleaned of organic contaminants as far as possible.
2. 10 liters of OWS-200TM should be applied directly to the system, the place of application should be as close as possible to the point of discharge of sewage into the system, this will allow the preparation to work also in the pipes supplying waste to the main tank.
3. In order to obtain the highest efficiency of the preparation, it is recommended to apply the preparation daily manually or automatically (peristaltic pump ) in an amount of about 100 ml (the amount of product applied daily can be reduced depending on the effects obtained and the degree of purification)
4. It is recommended to carry out an annual check of the operation of the system. Any solid contaminants that have entered it must be removed.
5. When using the biopreparation, it is recommended not to use chemical cleaning agents; the use of aeration effectively accelerates the process of decomposition of pollutants; It is recommended to apply the product daily outside business hours.
WHERE AND FOR WHAT TO USE?
In all branches of industry and in means of water transport. Use to remove unpleasant odours and organic and petroleum contaminants from installations, oil tanks, water-oil separators, settling tanks and industrial sewage tanks. Examples of impurities effectively removed with OWS-200™:
- ALCOHOLS
- BENZENE
- PETROL
- WHITE SPIRIT
- ETHYLBENZENE
- XYLENE
- KEROSENE
- NAPHTHALENE
- OIL WELLS
- DIESEL FUELS
- FUEL OILS
- ENGINE OILS
- ORGANIC PESTICIDES AND HERBICIDES
- AVIATION FUELS
- PARAFFIN
- TRANSMISSION FLUIDS
- PETROLEUM
- ORGANIC SOLVENTS
- TOULEN
- POLYCYCLIC AROMATIC HYDROCARBONS
TECHNICAL INFORMATION
Efficiency
- temperature - the optimum temperature of the preparation is in the range of 5.5 ° C - 48 ° C. Do not exceed 49°C
- type of impurity - some hydrocarbon impurities require a longer purification time
The experiments carried out show that the process of decomposition of impurities takes place immediately after the application of the solution. However, please note that depending on the factors mentioned above, it may change.
Composition: a mixture of naturally occurring, biologically active unicellular microorganisms, biosurfactants, nutrients, water
Atest PZH HK/M/0948/01/2015
Physical properties
- appearance – light yellow liquid
- scent –citrus
- boiling point – 100°C
- water solubility – total
- pH of the concentrate – 6.9 - 7.2
- Diluted pH –6.9 - 7.5
- evaporation rate – as for water