OWS-500™ cleaning agent for the mining, processing and transport of crude oil and its derivatives
PRODUCT DESCRIPTION
OFM-500™ meets the problems and needs of the oil extraction industry. Highly efficient and innovative agent degreases and removes impurities with crude oil and its derivatives. The formula of the preparation allows to remove contamination from hardened surfaces, soils and water, gravels, excavations, drilling and refinery platforms and equipment .
OFM-500™ effectively neutralizes crude oil components thanks to the natural active cleaning and degreasing agents that are components of the preparation. Active microorganisms convert hazardous chemicals into environmentally friendly substances (water and carbon dioxide) that can be absorbed by the soil or washed away. OFM-500™ does not contain solvents, is non-flammable, non-toxic, non-corrosive without corrosive properties; works in both fresh and sea water; Ideal as the main cleaner for routine maintenance in all phases of oil extraction.
HOW TO USE?
For direct use, it is recommended to dilute the concentrate with water in a ratio of 15-30 parts of water to 1 part of the preparation. The concentration of the solution should depend on the amount of dirt and the expected effect. OFM-500™ is suitable for pressure washers, industrial sprayers or manual cleaning.
When distributing the solution, pressure should be used to break the surface tension of the contamination. If the application is non-pressure, OFM-500™ should be manually mixed, aerated and distributed to contaminated surfaces. To do this, use a broom or hard-bristled brush. The above instructions must be followed in order for the cleaning and bioremediation processes to be carried out effectively.
WHERE AND FOR WHAT TO USE?
Extraction, processing and transport of crude oil and its derivatives. Use for degreasing and removal of contaminants with crude oil and its derivatives.
Examples of places and types of contamination:
- BOREHOLES
- MACHINE PARKS
- REFINERY EQUIPMENT FAILURES
- HYDRAULIC LINES
- COMPRESSOR STATIONS
- PUMP STATIONS
- SERVICE STATIONS
- OVERFLOW MANHOLES
- OIL WELLS
- AGRICULTURAL LAND
- WORKSHOP
- LEAKS DURING TENONING
- OIL CHANGE LEAKS
- GREASE LEAKS
- GLAND-LEAKS
- LEAKS FROM TRANSMISSION LINES
- PIPELINE LEAKS
- SELARING TANKS
TECHNICAL INFORMATION
Efficiency
- temperature - the product works effectively at temperatures from 5 ° C to 49 ° C, the highest work efficiency is achieved at
25°C-35°C. The temperature of the water used for dilution should not exceed 52°C. - pressure and oxygenation - the use of a sprayer or pressure washer effectively accelerates the process of removing contaminants
- type of impurity - some hydrocarbon impurities require a longer purification time
The experiments carried out show that the process of decomposition of impurities takes place immediately after the application of the solution. However, please note that depending on the factors mentioned above, it may change.
Composition: a mixture of naturally occurring, biologically active unicellular microorganisms, biosurfactants, nutrients, water
ATEST PZH HK/M/0948/02/2015
Physical properties
- Appearance – brown liquid
- scent –citrus
- boiling point – 100°C
- water solubility – total
- pH of the concentrate – 6.9 - 7.2
- Diluted pH –6.9 - 7.5
- evaporation rate – as for water