SpillAway FleetKleen industrial cleaner and degreasing agent 0,5L

€3.70
Shipping from warehouse: ⁨I3⁩
Estimated shipping: Fri, Nov 15 - Mon, Nov 18
14 days returnUnconditional return policy
Availability:
large quantity
Brand:
Spillaway
Product code:
5908214370702 / 5908214370702

FleetKleen-GOLD™ MEDAL 2015 at the POL-ECO-SYSTEM fair

PRODUCT DESCRIPTION

FleetKleen is a modern preparation with a wide range of applications, cleaning and degreasing various types of hard surfaces. The microorganisms contained in the preparation, naturally occurring in the environment and harmless to humans, as well as specially selected biosurfactants effectively break down organic pollutants, including fats, oils and hydrocarbons into water and carbon dioxide. FleetKleen is solvent-free, non-flammable, non-toxic, non-corrosive and non-corrosive.  Specially developed meets environmental and sanitary standards; At the same time, it is effective, economical, biodegradable and uses the bioremediation process. Also recommended for routine maintenance.


HOW TO USE?

The concentrated preparation should be diluted with water in a ratio of at least 15 parts of water to 1 part of the preparation, which will ensure the highest effectiveness. Depending on the degree and type of soiling , the preparation can be diluted more. In order to increase the effectiveness of the preparation, it is recommended to prepare the dilution about 20 minutes before starting work. FleetKleen is suitable for pressure washers and industrial sprayers. 

Guidance:

Pressure washer

1. Determine the concentration of the washing solution, remembering the recommended minimum dilution of the preparation (15 parts water to 1 part of the preparation).
2. Apply the solution directly to the contaminated area for cleaning and degreasing.
3. Use pressure to aerate and mix hard-to-remove dirt.
4. Do not dry the surface moistened with the preparation.
5. In the case of old dirt, it is suggested to repeat the pressure washing procedure several times.


Manual sprayer

1. In an industrial sprayer, prepare a washing solution of the required concentration , remembering the recommended minimum dilution of the preparation (15 parts water to 1 part preparation).
2. Apply the solution directly to the contaminated area, covering the entire surface thoroughly .
3. Wait a few minutes before proceeding to the next cleaning step.
4. Mix and aerate impurities by scrubbing with a broom or hard-bristle brush.
5. Do not dry the surface moistened with the preparation.
6. In the case of old dirt, it is suggested to repeat the manual spraying and scrubbing procedure several times.


WHERE AND FOR WHAT TO USE?

FleetKleen is used in all sectors of the economy where there are organic contaminants (e.g. leaks of hydraulic fluids, lubricating oils) on various types of hardened surfaces. Clear effects are obtained by using the preparation in exemplary places:

  • Garages
  • Households
  • Stores
  • car and truck washes
  • machine parks
  • Parking lots
  • industrial floors
  • Streets and sidewalks
  • construction sites
  • pumping stations
  • hydraulic lines
  • tool compositions
  • stations and service stations
  • elevator shafts
  • ventilation shafts
  • Factories
  • warehouses, warehouses, wholesalers
  • Petrol stations

TECHNICAL INFORMATION

Preparation of the preparation: the preparation can be diluted in the range from 1:15 to 1:100, depending on the degree of soiling and the desired effects.

Efficiency

The effectiveness and speed of action of the preparation are determined by:

  • temperature - the higher, the faster the action of the preparation
  • pressure and oxygenation - the use of a sprayer or pressure washer effectively accelerates the process of removing contaminants
  • type of impurity - some hydrocarbon impurities require a longer purification time

The experiments carried out show that the process of decomposition of impurities takes place immediately after the application of the solution. However, it should be remembered that depending on the factors mentioned above, it may change. 

Composition: biologically active single-celled microorganisms, biosurfactants, nutrients, water

PZH HK/M/0948/03/2015 certificate

Physical properties

  • Appearance – orange liquid
  • fragrance – citrus
  • boiling point – 100°C
  • water solubility – total
  • pH of the concentrate – 6.9-7.2
  • pH after dilution – 6.9-7.5
  • evaporation rate – as for water

Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.

Homepage