Material: polyamide 6.6 (nylon) or propylene-ethylene copolymer.
These are materials that provide resistance to atmospheric influences, aging of the material, rust and rotting.
They have a damping effect on vibrations and sounds are a good current insulator, have high tensile and compressive strength.
They are highly resistant to chemicals.
Nail screws with conical thread, galvanized steel.
Application: for light fixings in full building materials natural stone, concrete, brick.
It is allowed to use quick-mounting pins in hollow blocks and brick holes after selecting the length of the pin so that the expansion part includes at least one full partition.
They can be used both indoors and outdoors.
They are designed for fixing wooden slats, skirting boards, frames, profiles, wall corners, cable ducts, cable and pipe bands, foils, etc.
Simple mounting method by driving a nail screw into the peg with a hammer which significantly speeds up the assembly time.
The cross notch allows you to disassemble the pin or partially unscrew the nail screw.
Do not use high-speed drills for unscrewing.
Quick mount pin is used for tactile mounting - through a fixed element
and for this purpose it is supplied in a pre-assembled version together with a nail screw.
For fixing thin slats and foils, we recommend quick assembly pins with a mushroom flange (AG), which avoids damage or puncture.
These are materials that provide resistance to atmospheric influences, aging of the material, rust and rotting.
They have a damping effect on vibrations and sounds are a good current insulator, have high tensile and compressive strength.
They are highly resistant to chemicals.
Nail screws with conical thread, galvanized steel.
Application: for light fixings in full building materials natural stone, concrete, brick.
It is allowed to use quick-mounting pins in hollow blocks and brick holes after selecting the length of the pin so that the expansion part includes at least one full partition.
They can be used both indoors and outdoors.
They are designed for fixing wooden slats, skirting boards, frames, profiles, wall corners, cable ducts, cable and pipe bands, foils, etc.
Simple mounting method by driving a nail screw into the peg with a hammer which significantly speeds up the assembly time.
The cross notch allows you to disassemble the pin or partially unscrew the nail screw.
Do not use high-speed drills for unscrewing.
Quick mount pin is used for tactile mounting - through a fixed element
and for this purpose it is supplied in a pre-assembled version together with a nail screw.
For fixing thin slats and foils, we recommend quick assembly pins with a mushroom flange (AG), which avoids damage or puncture.