Manufacturer no: 10021225
Stamos Germany plasma cutter will work well in car workshops, metalworking companies, as well as among DIY enthusiasts. It perfectly copes with non-alloy, low-alloy, high-alloy steel. Suitable for processing nickel, copper, titanium, zirconium, as well as their alloys. Modern IGBT technology ensures excellent cutter performance. The three-terminal power conductor acts as an electronic switch that has high efficiency, fast switching and low failure rate. The pilot arc facilitates the ignition and outflow of gas after cutting, protecting the workpiece from oxidation. Two 2T and 4T operating modes allow you to adapt the machine to continuous or spot operation. The compact size and light weight allow convenient transport of the cutter. The current is set in the range of 30-100 A. Intuitive control panel with LCD screen allows you to control operating parameters. The included pressure regulator matches the compressed air pressure to the welding current, allowing you to adapt the machine to the type of material or cut. Depending on your needs, air compressors with different capacities can be connected. For smaller tasks, compressors will work, for complex and long cutting, a compressor with greater efficiency is suitable. This avoids pressure drops.
Product features:
- - Modern IGBT inverter and pilot arc,
- - Maximum cutting current of 100 A and 100% duty cycle at 63 A,
- - Control panel with LCD display and knob,
- - Cutting without deformation up to 35 mm thickness thanks to the pilot arc,
- - Easy change between work 2 and 4 - tact.
- - Model - S-PLASMA 100-IGBT
- - Catalogue number -10021225
- - Article status - New
- - Voltage [V] - 400
- - Plasma ignition - Pilot arc
- - Efficiency (at rated conditions) [%] - 85
- - Case cooling - Air cooling
- - Plasma wire [m] - 5
- - Duty cycle [%] - 40
- -Max. cutting current [A] - 100
- - Min. cutting current [A] - 30
- - Power cord [m] - 4
- - Rated input power [kVA] - 5,3
- - Ground cable [m] - 3
- - Power factor - 0,93
- - Gas outflow time after welding [s] - 10
- - Maximum input power [kVA] - 8,4
- - Insulation class - F
- - Maximum input current [A] - 22
- - IP rating - IP21S
- - Rated input current [A] - 22
- -Max. cutting thickness [mm] - 35
- - Idle voltage [V] - 269
- - Welding cycle current 60% [A] - 82
- - Welding cycle current 100% [A] - 63
- - CNC - No
- - Water cooling - No
- - Dimensions (LxWxH) [cm] - 62 x 27 x 50
- - Weight [kg] - 27,3
- - Shipping dimensions (LxWxH) [cm] - 75,5 x 42 x 58
- - Shipping weight [kg] - 34,5
- - Plasma cutter
- - Power cord 4 m, 4 x 4
- - Blackwolf P80 torch 5 m, 10 mm2
- - Pressure regulator
- - Cable terminals - 2 pcs.
- - Gas hose Ø8 x 12 mm x 4 m
- - Ground cable 300 A, 3 m, 16 mm2
- - Tips 1,3 mm - 4 pcs.
- - Nozzles 21,2 mm - 4 pcs.