Super strong paving stone cleaner with a high-pressure hot-water washer.
Super strong concentrate for degreasing and thorough cleaning of paving stones (concrete cube, polbruk, pozbruk, Bauma cube) from petroleum-derived dirt type:
lubricants, oils, tar, dirt of operational origin, fuels, etc.
Recommended for heavily contaminated surfaces around workshops, production halls, gas stations, petrol stations, transport bases, parking lots, garages, etc.
A highly foaming preparation.
The two-phase preparation (two colored layers) should be mixed before use in order to combine the two phases.
Capacity 1 L of concentrate = 100 m2 of paving stones. (10% solution)
Use:
- paving stones (concrete cubes, Polbruk, Pozbruk, Baum's cube)
- workshops, production halls
- petrol stations, petrol stations
- parking lots
Methods of use:
- Before use, read the safety data sheet of the hazardous chemical mixture.
- Before use, mix the concentrate thoroughly to combine the two phases.
- Prepare the working solution immediately after mixing.
- Use the preparation in a dilution of 5÷10% (500÷1000 ml / 10 liters of water).
- Apply to the soiled surface with a washer or foam lance, leave for about 5÷15 minutes, then wash off with hot water (70÷80°C) under high pressure.
- After cleaning the floor, neutralize with hot water, which will slow down the process of re-soiling.
Remark!
An excellent effect is achieved by rinsing the cube with steam (up to 130°C)
The clean surface can be impregnated with PROSTONE, which will greatly facilitate the process of re-cleaning.
Capacity: 1L
PH: 14
Super strong concentrate for degreasing and thorough cleaning of paving stones (concrete cube, polbruk, pozbruk, Bauma cube) from petroleum-derived dirt type:
lubricants, oils, tar, dirt of operational origin, fuels, etc.
Recommended for heavily contaminated surfaces around workshops, production halls, gas stations, petrol stations, transport bases, parking lots, garages, etc.
A highly foaming preparation.
The two-phase preparation (two colored layers) should be mixed before use in order to combine the two phases.
Capacity 1 L of concentrate = 100 m2 of paving stones. (10% solution)
Use:
- paving stones (concrete cubes, Polbruk, Pozbruk, Baum's cube)
- workshops, production halls
- petrol stations, petrol stations
- parking lots
Methods of use:
- Before use, read the safety data sheet of the hazardous chemical mixture.
- Before use, mix the concentrate thoroughly to combine the two phases.
- Prepare the working solution immediately after mixing.
- Use the preparation in a dilution of 5÷10% (500÷1000 ml / 10 liters of water).
- Apply to the soiled surface with a washer or foam lance, leave for about 5÷15 minutes, then wash off with hot water (70÷80°C) under high pressure.
- After cleaning the floor, neutralize with hot water, which will slow down the process of re-soiling.
Remark!
An excellent effect is achieved by rinsing the cube with steam (up to 130°C)
The clean surface can be impregnated with PROSTONE, which will greatly facilitate the process of re-cleaning.
Capacity: 1L
PH: 14