MITRE WITH EVOLUTION GUIDES 2000W + 255MM SAW

Specifications:

Laser guidance - TAk
Cutting length at 0° inclination in horizontal plane - mm: 300
Cutting depth at 0° vertical slope - mm: 80
Cutting length at 45° inclination in the horizontal plane - mm: 210
Cutting depth at 45° vertical inclination - mm: 45
Blade inner diameter - mm: 25,4
Maximum blade diameter - mm: 255
Weight (kg: 15,3
Rated power - W: 2000
Possibility of tilting right horizontally - °: 50
Possibility of tilting in the left horizontal plane - °: 50
Possibility of tilting in the left vertical plane - °: 45
No-load speed - rot/m: 3750
Maximum cutting thickness of mild steel sheets - mm: 6
Maximum cutting thickness of mild steel profile - mm: 3
Cutting length at 50° inclination in the horizontal plane - mm: 192



The new Evolution R255SMS+ multi-purpose miter saw can cut through many materials such as: steel profiles, aluminium profiles, plastics, wood, wood with nails. The 28-carbide blade used with special blade geometry ensures optimal cutting conditions.
When cutting steel profiles (structural steel), we obtain a surface without burns, ready for welding, and during cutting almost no sparks appear.
The device provides the ability to cut materials with a maximum cross-section of 300x80mm. Ideally suited for cutting copper and plastic pipes, aluminum profiles, MDF boards, scaffolding boards, skirting boards, hardwood such as ash and oak and many other materials.
When cutting recycled wood, both the miter saw and the blade do not cause a problem when cutting nails, screws or staples placed inside the wood.

The cutter can be fitted with a diamond blade (sold separately) designed for cutting bricks, stone, paving stones, etc.

The R255SMS+ is supplied with a multi-purpose RAGE255 blade (28 teeth).


**

Illustrative photos