LED TAPE-2835 ABILITE GREEN 300LED 12V IP65 5M/8MM SILICON BAN1

€4.17
Shipping from warehouse: ⁨M8⁩
Estimated shipping: Tue, Dec 24 - Fri, Dec 27
14 days returnUnconditional return policy
Availability:
large quantity
Brand:
ABILITE
Product code:
5901583547201 / 5901583547201

Specification

Average lamp failure rate in the nominal period:No data available
Cri/ra:>80
Diode:SMD2835
Diode manufacturer:Sanan (disambiguation)
Energy class:G
Intensity:1.19A
Is it designed for dimming:no
Lamp heating time up to 60% of the maximum luminous flux:Negligible
Length (z):5 m
Lifetime/l70:5 000 h
Light color:Green
Luminous flux:145 lm/m
Luminous flux maintenance coefficient:No data available
Mercury content:0%
Minimum split interval:Every 3 LEDs
Nominal shelf life:5 000 h
Number of diodes:60 LED/m
Number of on/off cycles:2 500
Optimal working conditions:No data available
Power:2.9 W/m
Power factor:1.0
Power of an equivalent incandescent lamp (ec no 244/2009):16 W/m
Product class:LED STRIP
Protection:IP65
Tension:12 volts
Viewing angle:120 degree
Water resistance:yes
Width (x):8 mm

Flexible green lighting strip, 5m long, equipped with 300 LEDs, thanks to which it consumes up to 95% less electricity than traditional lighting. Thanks to the flexible laminate, it allows you to obtain almost any shape, and its small dimensions allow you to use in the most inaccessible places, thanks to which it is irreplaceable when highlighting furniture, suspended ceilings, stairs, shop windows, niches and arches, or for creating luminous inscriptions. The LEDs used in the strip offer high brightness and wide lighting angle with a very high service life. Double-sided adhesive, strong tape on the product allows it to be permanently attached to the substrate. REMARK! LED bulbs and strips do not work with electrical transformers. The use of such power supplies will cause permanent damage to the light source (such damage is not covered by the warranty). For LEDs operating on 12V DC current, it is recommended to use only stabilized switched-mode power supplies. For LEDs operating at 12V AC/DC current, it is allowed to use toroidal transformers with a working range from 0W or stabilized pulse transformers.

Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.

Homepage