Glue for soft PVC 20 ml
Waterproof adhesive for the repair of thin-walled materials made of flexible plastics – PVC, polyurethane, coated fabrics.
Parameters:
Color: Colorless
Open drying time: 5 min.
Full curing: 12 h
Temperature resistance: -30°C to 80°C
Shelf life : 24 months
Features:
•flexible
•colourless
•does not contain toluene and cyclohexane
•glues under water
•UV and temperature resistant
•resistant to diluted acids, bases, oils
Use:
Glue For Soft PVC is used for gluing flexible PVC, polyurethane, coated fabrics.
Typical applications include:
•repair of inflatable toys
•repair of mattresses, raincoats
•repair of car tarpaulins
•repair of swimming pools (gluing under water)
Benefits:
•for the repair of thin-walled elements
•creates invisible welds
•safe to use
•repair of swimming pools without the need to release water
•to repair tarpaulins
Directions for use:
A. Joining elements:
1.Apply the adhesive to both surfaces and distribute it evenly.
2.Allow the solvents to evaporate (approximately 5 minutes at 18°C).
3.Firmly press the glued elements and leave to dry completely.
B. Sealing of cracks/holes:
1.From the attached film, cut a patch of oval shape (the size should be selected so that it covers the surface to be repaired with a minimum of one centimeter allowance).
2.Further steps as in point A.
C. Sealing holes under water:
1.From the attached film, cut a patch of oval shape (the size should be selected so that it covers the surface to be repaired with a minimum of one centimeter allowance).
2.Apply the glue on the patch, distribute it evenly and immediately press it to the repaired place.
3.Thoroughly smooth the applied patch and remove excess glue.
Note: when gluing under water, the weld may be cloudy.