Can flexible mean better?
The small thickness of only 0.28mm and full screen coverage makes Hofi hybrid glass almost invisible.
Hardness at the level of 7H obtained thanks to the ceramic coatings used.
These are the features of a hybrid of glass and foil, which means not only high resistance to pressure or scratches, but also full sensitivity to touch and perfect clarity and saturation of the image.
And finally, the most important thing, the biggest advantage of the product - it does not crack and does not crumble, unlike traditional tempered glass!
Check how to mount:
https://www.youtube.com/watch?v=j5WIzyY5AzA
INSTALLATION INSTRUCTIONS: 1. Installation of this glass model looks different than in the case of traditional ordinary tempered glass - on a thin adhesive layer, it is slightly more difficult due to the thicker adhesive layer.
2. In the initial phase of application, bubbles or air strips may remain trapped under the glass, which must be led out with repetitive movements to the edge, but the easiest way in this case is to peel off the coating to the place of the air bubble and glue it again, e.g. with an ATM card.
3. You also need to note that due to the curvature, the curvature of the glass must coincide with the curvature of the screen.
If the glass does not stick on either side, it means that it has been crooked, in which case you will have to peel off and try the assembly again until it works.
Due to the polishing and milling of the screen, it requires in some cases up to several minutes of work, but the correct final effect is delightful.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Surface hardness 7H
- Thickness 0.28mm
- Retains full sensitivity to touch
- Precisely matched
- Dimensions: ø40mm
THE SET INCLUDES:
1 x Hofi Hybrid Pro+ Glass
1 x Installation Kit