SINGLE-USE FILTERING HALF MASK X 210 V FFP2 NO D
STANDARDS AND CERTIFICATES
EN 149+A1:2010
CE 1437
Certificate: WE/S/2635/2016
DESTINY
Filtering half mask X 210 V FFP2 NR D is designed to protect the respiratory system against aerosols of solid particles,
water-based aerosols (dust, smoke) and aerosols with a liquid dispersed phase (mists) for which the NDS is ?0,05 mg/m3 provided that the concentration of the dispersed phase does not exceed 10 x NDS.
EXAMPLE APPLICATION
Moderately toxic particulate matter, dusts of asbestos, copper, barium, titanium, vanadium, chromium, manganese, hardwood dusts,
coal dust containing free silica above 10%, mining, chemical, metallurgical industry, hardwood processing.
CONTRAINDICATIONS
This half mask does not provide oxygen. It does not provide respiratory protection in conditions of oxygen deficiency (less than 19%).
It should not be used in spaces with a small cubic capacity, especially not ventilated, such as canals, manholes, tanks, etc.
The half mask does not protect against impurities in the form of gas vapors and fog of substances harmful to health and dangerous to life.
Do not use if the nature, concentration and properties of the harmful substances are not known. Do not use when extinguishing a fire.
The half mask does not provide tightness if it is worn on an unshaven or bearded face.
PERFORMANCE PARAMETERS OF THE XF 210 V HALF MASK
Class (acc. to PN-EN 149+A1:2010): FFP2
Penetration through the filter material of sodium chloride aerosol or oil mist: 6%
Total leakage: 8%
Initial inhalation resistance at 95 l/min: 240 Pa
Initial exhaust resistance 160 l/min: 300 Pa
CHARACTERISTICS
Filtering half mask XF 210 V FFP2 NR D consists of:
• multilayer filter material: polypropylene
• nasal clamp for formatting the half mask within the nose: polypropylene reinforced with steel wire
• polypropylene exhaust valve
• emergency tapes made of braided rubber threads, not causing allergies
• fastening of header tapes made of polyurethane
• nasal gasket made of polyurethane foam
The half mask is designed so that you can easily breathe in it during the entire working shift.
Thanks to its anatomical shape and nasal clamp and foam underneath, the half mask is easy to adjust for most face shapes to ensure the necessary tightness.
STANDARDS AND CERTIFICATES
EN 149+A1:2010
CE 1437
Certificate: WE/S/2635/2016
DESTINY
Filtering half mask X 210 V FFP2 NR D is designed to protect the respiratory system against aerosols of solid particles,
water-based aerosols (dust, smoke) and aerosols with a liquid dispersed phase (mists) for which the NDS is ?0,05 mg/m3 provided that the concentration of the dispersed phase does not exceed 10 x NDS.
EXAMPLE APPLICATION
Moderately toxic particulate matter, dusts of asbestos, copper, barium, titanium, vanadium, chromium, manganese, hardwood dusts,
coal dust containing free silica above 10%, mining, chemical, metallurgical industry, hardwood processing.
CONTRAINDICATIONS
This half mask does not provide oxygen. It does not provide respiratory protection in conditions of oxygen deficiency (less than 19%).
It should not be used in spaces with a small cubic capacity, especially not ventilated, such as canals, manholes, tanks, etc.
The half mask does not protect against impurities in the form of gas vapors and fog of substances harmful to health and dangerous to life.
Do not use if the nature, concentration and properties of the harmful substances are not known. Do not use when extinguishing a fire.
The half mask does not provide tightness if it is worn on an unshaven or bearded face.
PERFORMANCE PARAMETERS OF THE XF 210 V HALF MASK
Class (acc. to PN-EN 149+A1:2010): FFP2
Penetration through the filter material of sodium chloride aerosol or oil mist: 6%
Total leakage: 8%
Initial inhalation resistance at 95 l/min: 240 Pa
Initial exhaust resistance 160 l/min: 300 Pa
CHARACTERISTICS
Filtering half mask XF 210 V FFP2 NR D consists of:
• multilayer filter material: polypropylene
• nasal clamp for formatting the half mask within the nose: polypropylene reinforced with steel wire
• polypropylene exhaust valve
• emergency tapes made of braided rubber threads, not causing allergies
• fastening of header tapes made of polyurethane
• nasal gasket made of polyurethane foam
The half mask is designed so that you can easily breathe in it during the entire working shift.
Thanks to its anatomical shape and nasal clamp and foam underneath, the half mask is easy to adjust for most face shapes to ensure the necessary tightness.