COMBO SET 40V XGT HP001G+TD001G 2*4.0AH BAG

Technical data:

HP001G:

Supply voltage: 40Vmax XGT
Battery Type: Li-ion
Supported Batteries: 2.5 / 4.0Ah
Speed at idling speed:
gear 1: 0 - 650 rpm
gear 2: 0 - 2600rpm
Frequency of strokes at idle:
Heat 1: 0 - 9750 /min
gear 2: 0 - 39000/min
Max. drilling diameter in steel: 20mm
Max. drilling diameter in wood: drill bit: 50 mm
sednik: 76 mm
hole saw: 152mm
Max. drilling diameter in concrete: 20mm
Max. moment of rotation soft / hard: 68 / 140Nm
Clamping range: 1.5 - 13mm
Dimensions (total length): 182mm
Weight (EPTA): 2,7 - 3,0kg

TD001G:

Supply voltage: 40Vmax XGT
Battery Type: Li-ion
Supported Batteries: 2.5 / 4.0Ah
Speed at idling speed:
gear 1: 0 - 1100 rpm
Gear 2: 0 - 2100 rpm
gear 3: 0 - 3200 rpm
Gear 4: 0 - 3700rpm
Frequency of strokes at idle:
gear 1: 0 - 1100 /min
gear 2: 0 - 2600 /min
gear 3: 0 - 3600 /min
gear 4: 0 - 4400/min
Standard screws: M5 - M16
Machine screws: M4 - M8
Screw with a height of withstand. for stretching: M5 - M14
Screws with regular thread: 22 - 125mm
Max. torque: 220Nm
Tool holder: hexagonal 1/4"
Dimensions (total length): 120mm
Weight (EPTA): 1,7 - 2,0kg



HP001G:

Cordless 2-speed heavy-duty impact drill and screwdriver powered by a 40Vmax XGT battery
BLDC - brushless DC motor
XPT Technology - Increased Resistance to Dust and Moisture
AFT technology - Active Feedback Sensing - automatic shutdown of the tool in the event of a sudden slowdown or stop of the drill (so-called kick-back)
Electronic torque control:
- 41 degrees of torque setting in gear 1 (in the range of 1 - 45 Nm)
- 21 degrees of torque setting in gear 2 (in the range of 1 - 10 Nm)
Digital display indicating the selected torque setting
Compact size - total length 181 mm
Quick-release drill chuck
Gear components made of metal for increased service life
Control of rotational speed with a switch trigger
2 LEDs illuminating the working area with delayed blanking function

TD001G:

Heavy Duty Cordless Impact Screwdriver Powered by 40Vmax Li-ion Battery
BLDC - brushless DC motor
XPT Technology - Increased Resistance to Dust and Moisture
4-stage electronic speed and surge frequency switch
Speed control with switch trigger
6 screw assist options:
- Mode of operation "A" - in this mode, the tool starts screwing in at low speed, then turns on the impactor and increases the speed until the max is obtained. Speed
- Operation mode "T" for thick sheet metal - a special mode for optimal and fast screwing of self-drilling screws
- Operation mode "T" for thin sheet metal - the device stops automatically after 3 strokes
- Screw mode with automatic stopping of the device when tightening/decanting bolts and nuts (3 levels of mode setting for both tightening and unscrewing bolts and nuts)
Quick mode change function
2 LEDs illuminating the working area with delayed blanking function located on both sides of the housing
Maximum torque - 220 Nm
Ergonomically designed handle covered with elastomer



Cordless 2 Speed Impact Drill And Screwdriver 40V max HP001G
Cordless Impact Screwdriver 40V max TD001G
2 BL4040 batteries (40 V max / 4.0 Ah)
Charger DC40RA
Adapter for charging 18 V batteries in DC40RA ADP10 charger
Transport bag

**

The photo has an illustrative function.