SADPAL is a catalyst that helps in the combustion process in the burning of soot, tar mass and unburned hydrocarbons,
eliminates carbon monoxide and other substances harmful to the environment, eliminates the formation of black smoke from the chimney.
It can significantly reduce fuel consumption by up to 15%.
It has a cleaning effect on the hearth and chimney, reduces corrosion.
It eliminates soot, coke and deposits by fully burning them.
It sensationally reduces the emission of pollutants into the atmosphere.
It is successfully used in thousands of individual recipients.
Dosage at the rate of 1.5 - 3 kg per 1000 kg of coal, coke or wood.
The product is not flammable or explosive.
A practical signal for the use of SADPAL is the settling of soot on the charging door in grate furnaces or soot on the walls of the fireplace.
When using SADPAL for the first time, the hearth should be well warmed up to temp. above 650 ° C and on the layer of heat and fire apply such a dose of the preparation that the smoke coming out of the chimney is white.
The size of the first dose depends on the size of the boiler, the tar layer and soot on the walls of the hearth,
e.g. for a boiler with a total area of 3 m2 - 0.5 kg of preparation and for a boiler with an area of 25 m2 - 6.0 kg.
At the time of throwing SADPAL on the embers, a good air supply should be ensured.
After throwing the preparation, the color of the fire changes.
After 30 - 40 minutes, its operation is checked, the walls of the furnace should whiten.
This is a signal that soot burning is going well.
Then the deposit and slag and soot should crack, curl and fall off the walls of the furnace.
We always start cleansing with a smaller amount of SADPAL , if the effect is not satisfactory we increase the dose .
An overdose of Sadpal in the hearth does not threaten with any consequences .
After the first dosage, if necessary, you can clean the walls of the furnace with a spatula or a wire brush without any difficulty.
eliminates carbon monoxide and other substances harmful to the environment, eliminates the formation of black smoke from the chimney.
It can significantly reduce fuel consumption by up to 15%.
It has a cleaning effect on the hearth and chimney, reduces corrosion.
It eliminates soot, coke and deposits by fully burning them.
It sensationally reduces the emission of pollutants into the atmosphere.
It is successfully used in thousands of individual recipients.
Dosage at the rate of 1.5 - 3 kg per 1000 kg of coal, coke or wood.
The product is not flammable or explosive.
A practical signal for the use of SADPAL is the settling of soot on the charging door in grate furnaces or soot on the walls of the fireplace.
When using SADPAL for the first time, the hearth should be well warmed up to temp. above 650 ° C and on the layer of heat and fire apply such a dose of the preparation that the smoke coming out of the chimney is white.
The size of the first dose depends on the size of the boiler, the tar layer and soot on the walls of the hearth,
e.g. for a boiler with a total area of 3 m2 - 0.5 kg of preparation and for a boiler with an area of 25 m2 - 6.0 kg.
At the time of throwing SADPAL on the embers, a good air supply should be ensured.
After throwing the preparation, the color of the fire changes.
After 30 - 40 minutes, its operation is checked, the walls of the furnace should whiten.
This is a signal that soot burning is going well.
Then the deposit and slag and soot should crack, curl and fall off the walls of the furnace.
We always start cleansing with a smaller amount of SADPAL , if the effect is not satisfactory we increase the dose .
An overdose of Sadpal in the hearth does not threaten with any consequences .
After the first dosage, if necessary, you can clean the walls of the furnace with a spatula or a wire brush without any difficulty.