Amiko MultiTracker 3 DVB-T/T2/S/S2/C/C2 meter
Multitracker recognized Amiko company is an advanced satellite meter for measuring and analyzing TV signals: satellite, terrestrial and cable (DVB-T/T2, DVB-S/S2, DVB-C/C2). The multifunctionality of Multitracker 3 will allow, m.in to measure power, check the signal quality at every point of the antenna installation and precisely position the antenna. The device has been equipped with a color AMOLED display with a diagonal of 5'', which allows you to preview individual stations and present current signal parameters.
With the Amiko Meter you can measure the strength of all signals. It will provide accurate measurement of satellite, cable and terrestrial television (including DVB-T2 HD). The housing is made of high quality aluminum. The menu is easy to use and intuitive. All measurement functions are easily accessible and clearly presented.
To evaluate the satellite system's signal and analyze reception errors, use a real-time spectrum analyzer. The spectrum changes immediately as the signal moves, and the display graph is constantly updated.
- 5-inch (12.7 cm) AMOLED color display
- Support DVB-S/S2/DVB-T/T2/DVB-C/C2
- TS Demux: Standard according to ISO/IEC 13818-1
- Video decoding: MPEG4, MPEG4-AVC/H.264 and H.265/HEVC High Tier@Level4.1, MPEG2 ISO/IEC 13818-2MP@HL/ML
- Audio decoding: MPEG1, MPEG2 ISO/IEC 13818-3 LAYER I&II
- LNB short-circuit protection
- Extremely fast and accurate with high sensitivity
- Database easily editable by the user
- Sound signal block indication
- USB connection for firmware update, data log and screenshot
- The database can be edited on your computer and downloaded via USB.
- Power supply for DVB-T/T2 antennas: 5V, 12V, 18V, 24V
- Power supply 100-240V / 50 / 60Hz 12V, 2000mA.
- Very long standby time, low power consumption
- 7.4 V / 5000 mA Li-ion battery with fast charging
- High quality housing made of aluminum
1. Bag strap
2. Car charger
3. RCA cable
4. Case/bag
5. Wall charger
Satelitte - DVB-S/S2
- Power LEVEL, CBER, VBER(DVBS) , LBER(DVBS2), and CNR display.
- Real time Spectrum-Analyzer and transponder message detected
- Constellation diagram
- Angle calculation of azimuth and elevation.
- Azimuth and elevation measurement.
- Power,dBm,CNR, BER, Modulation mode display.
- DisEqC1.0, DisEqC1.1, DisEqC1.2, USALS ,SCD and SCR2 supported.
- Auto DiSEqC identification for DisEqC1.0.
- Cable identification at Quattro LNB easily
- Auto Satellite identification.
- LNB Current and Voltage monitor
Terrestrial - DVB-T/T2
- Power LEVEL, CBER, VBER(DVBT) , LBER(DVBT2), and MER display.
- Spectrum analyzer
-Constellation
- Signal identification : DVB-T/T2 Automatic
- Scope display for multi-channels
- DC DVB-T/T2: 5V, 12V, 18V, 24V
Cable - DVB-C/C2
- Power LEVEL, CBER, PER(DVBC) , LBER(DVBC2), and MER display.
- Tilt Display
- Spectrum analyzer
-Constellation
- Tilt display for three channels
- Power supply: 100-240V (50/60Hz) AC in / 12V/2000mA out
- Fast Charging
Data sheet - download.
