Electronic water hardness and salinity meter. This tester will be useful in everyday life when checking the purity of drinking water and in other applications (e.g. aquaristics or laboratory tests). The device is very easy to use - just remove the cap, immerse the electrodes in the tested water. The built-in LCD display enables accurate and clear measurement of water hardness (its contamination with inorganic compounds) and its temperature. It does not require external power sources (electrical network), but only one CR2032 battery, which makes it extremely mobile and safe in contact with water.
Product features:
- The water hardness meter allows you to check the level of water contamination with inorganic substances. The meter is calibrated in the values of "ppm" - parts per million, i.e. the most popular method of determining the amount of molecules of chemical compounds dissolved in water. The less polluted the water, the less electrical conductivity it will be. Raw, unfiltered water can show a result as high as 200 PPM or higher.
- The EC conductivity of water can be considered as an indicator of salt content, waters with little ion have a low electrical conductivity, while seawater, for example, has a very high conductivity. A commonly used unit of water conductivity is μS/cm (= micro-Siemens/cm). Fresh water or pond water should have a conductivity between 300 and 1200 μS/cm.
- The tester is characterized by high accuracy of measurements.
- The measurement result shall be read on a clear LCD display. You will immediately check whether the water is suitable for drinking and other uses.
- The operation of the tester is fabulously simple - just immerse the electrode in water and the measurement result immediately appears on the reader.
- Built-in physical function buttons for easy use. The HOLD function saves the measured result and the SHIFT function changes the TDS/EC measurement function
- Practical case included - protects the device from damage.
Specification:
- Material: Plastic
- Power supply: 1x 3V CR2032 battery
- Has a HOLD memory function
- Measures water temperature 0.1 - 80 C
- Functions: TDS (Total Dissolved Solids), EC (Water Conductivity)
- TDS reading in the range of 0-9999 ppm
- EC reading in the range 0-9999 μS/cm (= micro-Siemens/cm)
- Lcd
- Practical case included
- Dimensions: 154mm x 30mm x 14mm
- Color: white
We invite you to place an order!