| Aluminium: | Useful in certain conditions |
|---|---|
| Cast iron: | Recommended |
| Colour/lacquer: | Recommended |
| Max. speed: | 23000 min-1 |
| Non-ferrous metal, hard: | Recommended |
| Non-ferrous metal, soft: | Recommended |
| Ø x height: | 9 x 35 mm |
| Plastic/glass fibre reinforced plastic: | Recommended |
| Recommend. speed: | 15000 min-1 |
| Steel: | Recommended |
| Wood: | Recommended |
Abrasive tape in roll POLIROLL®, K 80, cylindrical
Execution: bonded with synthetic resin bulk corundum (A), on a spirally wound fabric substrate. After the outer abrasive fabric wears out, fresh abrasive grain is used in each case. With very good cutting performance. Grind always with the tip, not the surface, otherwise the gluing will be damaged by high temperature.
Application: for steel and cast iron. For processing holes, fillet joints and deburring on cast iron.
Despite our best efforts, we cannot guarantee that the published technical data and photos do not contain inaccuracies or errors, which, however, cannot be a basis for claims.